The Modern Way to Access
At its most general level, access control is a way of controlling who enters a building or site and when. The individual entering could be using the access card duplication for various reasons to access many different locations such as offices, buildings, parking lots, etc.
Although one of its essential functions is to improve security, and access control systems can also provide a variety of other advantages, improved business process efficiency and site or building management are only a few examples.
What Is An Access Card?
We commonly refer to an electronic safety system when we discuss a physical access control system. To authorize someone to enter specified places, they usually utilize a unique identifier such as an access card or key card. They may also provide vital data to help you monitor how your sites and buildings are being used because they can register who accessed where and when.
Instead Of Using Keys, Why Not Utilize An Access Control System?
Mechanical keys are the simplest type of physical access control and are used by many smaller businesses. Even for a small business, mechanical keys have various problems and restrictions – especially as a firm grows more prominent. The following are only a few of the issues that can arise while employing keys.
People Misplace Their Keys:
If a key is misplaced, you must change the lock to ensure that the lost key cannot be misused. Then you’ll need to give out new keys to everyone who has to use that door.
There Is No Audit Trail With Keys:
You can’t see when and if someone has used a key; therefore, you have no idea who entered or when.
It Is Difficult To Manage Keys:
If someone has to enter several different buildings and rooms, they’ll require a lot of keys, which are cumbersome to carry around and utilize. It can be tough to remember which key goes with which door, but labeling them poses too much security concern.
Access Cards Provide Increased Security And Control:
You may avoid the drawbacks of utilizing mechanical keys while also gaining more control by employing an electronic access control system.
Access cards can manage:
Who Has Access:
For example, you could only wish to provide staff automatic access. Visitors and contractors, on the other hand, would report to the reception desk upon arrival.
Which Doors They Can Access:
You might only want specific people to be able to access particular areas. For example, you might only want technicians in your laboratory.
What Times They Can Access:
Contractors and subordinate employees may only be permitted to enter the facility during their regular shifts, whereas senior employees may do so at any time.
Under Which Conditions They Are Allowed Access:
You could, for example, configure your system so that contractors can only have access if they can prove they’ve given their certification.
A sound access control system allows you to define these parameters for each individual, which provides you with even more control. You may also change them quickly and easily anytime you need them.
This will also show you who has accessed what and when making it easier to discover who may have been involved in the case of an incident.
RFID Key Cards:
“Radiofrequency identification” is the abbreviation for RFID. A microchip, commonly known as an RFID tag, stores data. When it concerns key card entry systems, RFID cards have many variants.
RF waves are used in RFID technology to read and transfer data. 125 kHz low or normal frequency is utilized for proximity cards, 13.56 MHz range for high-frequency smart cards, and 870-960 MHz ultra-high frequency (UHF) for wide operating range applications are the RFID frequency bands used in cards.
Contactless Cards for Access Control:
For key card entry systems, there are three main types of contactless cards. These can be read without being placed into the reader and can be scanned from a distance. They all employ RFID protocols, but they store and read data using various methods. They come in three different types:
Proximity Cards:
Low-frequency RFID cards, sometimes known as proximity cards or smart cards, do not require insertion into the reader, unlike swipe cards. Proximity cards typically operate on the LF band at 125 kHz. These are contactless, read-only cards that can only hold a limited amount of data.
Proximity cards can be scanned from a distance of up to 15 inches (50 cm) in most cases. They have the same benefits, restrictions, and operating methods as RFID cards, with the exception that they do not require insertion into a reader.
Smart Cards:
Instead of an RFID interface, smart cards have a microprocessor. Smart cards that are contactless can be recognized from up to 4 inches away (10 centimeters). Smart cards typically feature an 8k storage capacity.
NFC Key Cards:
NFC (Near Field Communication) cards, often known as NFC smart cards, are a type of high-frequency RFID that a smartphone or any other NFC-enabled device can read. These cards have a writable NFC chip that may be used with an NFC-enabled smartphone to read and store numbers, messages, and other microdata.
Access Card Duplication with Locksmith Dubai:
We offer access card duplicate near me services to our clients at a reasonable price for identification and security. Our technicians at Locksmith Dubai will supply you with duplicate door, copy access card Dubai services to keep you safe.
We also provide access card duplicators for practically every brand. We can meet the needs of our clients while staying within their budget. Receive card duplicating services that are ideal for any security purpose. Get the most reliable services in Dubai to safeguard your office, business, or site from theft and burglar activities by contacting Key Maker Locksmith In Dubai.
Our locksmiths are experienced and efficient in providing services to our clients, which is why we have been offering quality-based locksmith services for many years. For more information regarding our access card duplication services, call us at 055-9840111.