Top 5 Methods on How to Remove a Key Stuck in the Ignition?

Having your stuck key in the ignition when you’re finished driving is a hassle. Avoid using sheer force to remove the key since doing so might result in the entire thing falling apart. If the key doesn’t come out the first time, it probably won’t come out again no matter how hard you try. A frustrating scenario, especially if you need to get somewhere critical, might occur. If you’re determined, you can fix it on your own.

There are alternatives for removing a stuck key from the ignition. This article describes how to remove a key that has been lodged in an ignition lock by following the simple methods below or by considering service of the best Dubai Locksmith. Start by calming down since panicking won’t help. To remove a stuck key, use one of the following five methods.

How To Remove a Key Stuck in The Ignition?

After checking the gear position, steering wheel lock, and battery, you should also check the ignition switch if your key is stuck in your ignition. You may be unable to remove the key from the ignition because of any one of these three possibilities. Try jiggling the steering wheel while removing the stuck key to see if it’s in place. Finally, make sure your battery isn’t dead. To get the key out, you’ll have to attempt the alternative methods mentioned below.

How To Remove a Key Stuck in The Ignition?

After checking the gear position, steering wheel lock, and battery, you should also check the ignition switch if your key is stuck in your ignition. You may be unable to remove the key from the ignition because of any one of these three possibilities. Try jiggling the steering wheel while removing the key to see if it’s stuck in place. Finally, make sure your battery isn’t dead. To get the key out, you’ll have to attempt the alternative methods mentioned below.

Set the Gear to Parking

When an automobile is not parked, the steering wheel is locked for safety reasons. When the gear is not in neutral, the steering wheel is locked to prevent the automobile from driving on its own. For manual automobiles, make sure the gear is neutral, and for automatic vehicles, make sure the gear is in the park. The steering wheel can be jiggled back and forth to loosen a jammed key from the ignition. The anti-theft device on your car’s ignition might cause the steering wheel to lock, preventing the key from being removed. A loosening of the ignition’s grip by jiggling the steering wheel is all that’s required to release the key.

Use a Key Extractor

Use a key extractor to extract your broken keys if you have one on hand. Key extractor, needle-nose pliers, and lube are all you’ll need. You can use a lock lubricant, although WD-40 will work. ‘ The following are the steps:

  1. Make sure your car is parked, and the parking brakes are on before you begin.
  2. Before you begin, lubricate the ignition cylinder.
  3. With the hook end facing up, insert the key extractor tool into the ignition cylinder and pull the key out with it.
  4. To know when the extractor tool has finished its work, you should be able to feel it come to a halt.
  5. Slowly remove the damaged key from the lock. Ideally, the hooks of the extractor should be caught on the teeth of the key.
  6. A needle nose plier can be used to extract the damaged key. You don’t have to use your hands if you can.

A key extractor tool is required to remove a key if you don’t already own one.

Broken Key

Don’t try to re-insert the other half of your key if it breaks when you’re attempting to remove it off the ignition. To securely remove an ignition with a damaged key, follow these steps:

Use a Key Extractor

To remove a damaged ignition key, most locksmiths advocate the use of an extractor.

Use Hacksaw Blade

The hacksaw blade may be readily inserted into the ignition since it is so thin. Turn the edge slightly to unlock it once it’s in. Remove the blade from the ignition to remove the broken key.

By Use Of Pliers

You can use a needle tip plier to extract the key from the ignition if a portion of the broken keys remains visible on the surface. Using superglue or melted wax, you may improve the plier’s grip.

Use a Wire Coat Hanger

Make a hook out of a wire coat hanger and put it into the ignition with a pair of pliers. Pull the broken key out of the ignition one piece at a time with the help of the wire.

Call a locksmith!

It’s time to call a locksmith if you’ve tried all the procedures listed above and are still having problems. It’s possible to find one online or obtain a recommendation from a family member or friend about a locksmith in Dubai or any other place. All this work may be done remotely by a locksmith who can come to your site with a mobile workstation. Unlike a mechanic, a locksmith doesn’t need to tow the car or do anything other than wait for help. It doesn’t matter if your lone automobile key is broken in the ignition; a locksmith can produce you a replacement key.

Maintaining the Ignition Lock Cylinder

To work properly, the ignition system must be greased. If the cylinder is excessively dry, the pins may wear out or damage the key. You can use graphite lubricant to get the key out of the cylinder. To keep the ignition cylinder running smoothly, it must be lubricated from time to time. The metal pins within the locking mechanism move over the key to detect if it is the proper one that might wear out. Consequently, the ignition key gets stuck.

Make Sure There Isn’t a Dead Battery

Battery power is critical to the ignition mechanism. If the battery is low or dead, the ignition key may get stuck. You can either jump-start or replace your vehicle’s battery. Using a hammer to tap on the battery may help free the key from the ignition.

Conclusion: When you’re in a hurry and don’t know how to get the key out of the ignition, it may generate a lot of stress and panic. There are several common causes for a key to get trapped in the ignition. To remove your key from the ignition, follow the simple steps mentioned above, park your vehicle, and go on your way. A locksmith is always an option if you fail to remove the stuck key on your own. You can simply Google “duplicate key makers near me”, to find the best service.

Leave a Reply

Your email address will not be published. Required fields are marked *