If your car key is used for a long time, it may break off in the lock. The lock will become unusable until you remove the broken part. As long as the key is already locked, you won’t be able to open the vehicle, and you will need a new key as well.

With today’s technology, this particular issue will soon be moot; over the last decade, automakers have increasingly equipped their newer models with “smart keys” that consist of a microchip that can be pushed to begin your engine with the touch of a button. You will long for the aggravating antiquity of extracting a broken key out of your ignition lock if you lose your smart key and don’t have a spare.

However, if your car key broke off the ignition, you need to be very cautious when fixing this issue since any wrong action could break off the key or the ignition itself. Therefore, we have shared some fantastic tips in this guide to help you get out of this trouble, just in case you got into one. And we have also introduced Locksmith Dubai to assist you in many issues. 

What to do with Broken Keys in Ignition?

The following are ways you should work out when your keys get broken in the ignition.

Don’t Take any Step Without the Right Tools

It’s a bit more complicated to remove a broken key from an ignition cylinder than removing a broken key from a lock. You might be able to gather supplies more efficiently if your car key broke off in the ignition while you were still at home. It may be more challenging to find the right materials and tools if you are stranded.

Some of these essential tools to be used are:

#1 Mini Hacksaw Blades 

The devices are commonly found in hardware stores. They are used by sliding inside the ignition cylinder and the broken key. A very small, very thin blade is required for them to work. While pulling out the key, you turn the serrated edge of the blade toward the key. If you use a hacksaw repeatedly, the ignition can be damaged.

#2 Hair Pins

You probably already have this type of pin on you, and they’re widely available at convenience stores, rest stops, and gas stations. In many cases, these are too small to be bent into tools and should only be bent into probes to pry at the key. Think of using pins the same way you would use tweezers or chopsticks.

#3 Tweezers

Tweezers can be found in almost every beauty or make-up aisle and are perfect for extracting broken key fragments. It would be ideal if they were thin enough to fit through the keyhole. Tweezers should have a natural opening wide enough to accommodate the blade of a key.

Call Out For Help

It’s best to call a professional auto locksmith in Dubai if you need assistance removing a broken car key from an ignition. This process is made easier by hiring a professional. While removing the broken key, a locksmith in Dubai will ensure that the ignition cylinder is not damaged. On the spot, the Dubai locksmith can make a new key. In addition, he can diagnose any other lock or key-related issues you might be experiencing.

The best way to get back on the road safely is to call a locksmith in Dubai if the key broke off in the ignition. Ensure the solution you choose for your broken key won’t be worse than the problem. Keeping this in mind, it is not like having an ignition key stuck in the car. Call a locksmith near for full service if your key is broken and needs to be repaired or replaced.

Don’t Damage the Ignition

You can break your car’s ignition if you do not proceed with caution after a key broke off in it. A damaged ignition can have more serious repercussions than an ordinary lock. It is your primary mode of transportation, an enormous investment, and must function properly. 

Therefore, it is recommended that the broken key be removed from the ignition by a locksmith in Dubai. If you perform a broken car key extraction incorrectly, you may cause unnecessary damage to your ignition.

We have a few recommendations for preventing damage if you attempt to remove a broken key from an ignition. Make sure that you are extremely careful about what you put in the keyway as a first step. Do not extract using superglue, for instance. If not sure what to do, ask someone for help. 

You may need a smaller tool if something doesn’t go in smoothly. Don’t overdo it if something doesn’t go smoothly. Overuse or harsh tool treatment can damage a car’s ignition, preventing even a working car key from turning.

Conclusion

Take a deep breath and stay calm if your car key broke off in the ignition. A high level of excitement or anxiety increases the likelihood of making a mistake that damages your ignition. A damaged ignition necessitates a replacement ignition and perhaps a re-keying of the replacement ignition. Save yourself a lot of time, money, and stress by getting the job done right the first time. Dubai Locksmith would offer the service you need if you broke your car key in the ignition.

Hence, make sure that you don’t mess up with the ignition and take precautions before starting the process independently. The most efficient decision is to ensure that you call out for professional help. Dubai locksmith will help you solve the key issue and get the job done at an affordable rate. So, what’s the wait for? Call out for help and make your life easier.